Method for cleaning insulator

* live water flushing: 2 methods of rushing water and small water rushing. Flushing water, useful length of the operating rod, the human and the charged part of the interval necessary to comply with industry regulations.

 

* blackout cleaning: that is, after the line blackout workers climb the pole wipe with a rag. Such as clean dirt, can use wet cloth to wipe, can use detergent to wipe, wipe if still not net, should replace or change the composition of insulator insulator.

 

* Power: usually use a clean brush or tied to the insulating rod of cotton, wipe the insulator at work on the line. 

 

Insulation rod used by the electrical properties and useful length, people and charged some of the interval, should comply with the corresponding voltage level rules, it is necessary to operate a special monitoring.